Intensive - Daewoo MINI DWC-M25CW User Manual

Intensive

Use this course to wash heavily soiled clothes.
1
1) Turn on the washer by pressing the Power button (①).
2) Open the drum door.
Press the Door Release button (②) to open the drum door.
3) With the drum door open, place the laundry load inside the drum, add the detergent and
the fabric softener to their respective drawers, and the close the drum door.
Make sure to close the detergent and fabric-softener drawers completely before proceeding.
To change the number of rinse cycles after selecting a course, press the Rinse+ button (④).
Each press of the button adds 1 rinse cycle.
Water temperatures is set to 40°C, number of rinse cycles is set to 3, and spin intensity is set to
high automatically.
※ The maximum number of rinse cycles allowed for Intensive course is 7.
4) Repeatedly press the Course button (③) until Cold is selected.
5) Press the Start/Pause button (⑤).
The door will lock, and the washer will start filling with water.
Note:
- To change the settings while the washer is in operation, first pause it by pressing the Start/
Pause button and then make the changes.
- Pressing the Power button and then the Start/Pause button starts the wash cycle using the
initial auto-selection settings.
- Intensive, "Rinse+" 5times, Test Load 2.5kg, 230V, detergent dosing : in 1 litre warm water,
Anti-foaming Agent use programme is suitable for soiled load and tested in accordance or
in conformity with AS/NZS 2040.1
2
3
"Use the Intensive course to wash heavily soiled clothes clean."
| 26 |
4 5
Tip