Samsung NH080PHXEA Installation Manual page 40

DHW tank (Continued)
Space requirements
Positions of water inlet and outlet pipe are affected by the layout of DHW Tank.
The layout of pipes and other components except DHW tank are the responsibility of installers.
The DHW Tank must be laid out in accordance with the illustrations as below to prevent any water leakage
and malfunction.
 Observe the clearances and dimensions as seen below during installing the water tank.
Note  The installation space mentioned above is minimum suggested clearance.
 To secure enough service space and performance of system, take account of more sufficient
space.
 Be sure to install unit in a place strong enough to withstand its weight.
[Total weight 365 kg, Tank(65 kg), Water(300 kg)]
(Unit :mm)
Volume H h
200 1130 800
300 1580 1250
40
E-
NH080PHXEAHydro unit_IM_E 32659-1.indd
90°
40 2010-07-28 ｿﾀﾈﾄ 8:59:51