Related Manuals for Vent-Axia EKF355E1
Summary of Contents for Vent-Axia EKF355E1
- Page 1 EC kitchen extract fan range Installation and Wiring Instructions Stock Ref. N° EKF355E1 EKF400E1 EKF450E1 EKF450E3 EKF500E3 EKF560E3...
- Page 2 INVOLVED IN THE INSTALLATION. AT ALL TIMES, INSTALLATION PRACTICES MUST COMPLY WITH RELEVANT HEALTH AND SAFETY LEGISLATION. 10. EKF EC KITCHEN FAN UNITS ARE DESIGNED AND SPECIFIED FOR USE WITH VENT-AXIA CONTROLS, DAMPERS, GRILLES AND ACCESSORIES. 11. THIS APPLIANCE IS NOT INTENDED FOR USE BY YOUNG CHILDREN OR INFIRM PERSONS WITHOUT SUPERVISION.
-
Page 3: Product Description
Product description The EKF EC kitchen extract fan is suitable for continuous running at 120°C in-duct air temperature. It can be mounted indoors or outdoors and controlled using the 0-10V potentiometer included. Installation The EKF EC kitchen extract fan is designed as a kitchen extract fan to be positioned between lengths of ducting. - Page 4 The EKF EC kitchen extract fan is supplied with 3 x optional discharge positions. Before installation, consideration needs to be given to which discharge outlet is required. The discharge panel and 2 x access panels are interchangeable to suit the installation. It is recommended that duct connections to the unit are made via flexible connectors, (see accessories list).
- Page 5 Connection of flexible connectors, transformation pieces, mounting feet, weather roof and discharge cowl should be made using the 8 x M6 fixing points located on each side of the unit. Maximum thread length into these fixing points is 12mm. Fixings are included with Vent-Axia supplied accessories. Wiring WARNING: THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE ISOLATED FROM THE POWER SUPPLY DURING THE INSTALLATION / OR MAINTENANCE.
- Page 6 Variable speed 230V, 1Ph, 50Hz Controls box Isolator Applies to: EKF355E1 EKF400E1 EKF450E1 Full speed 400V, 3Ph, 50Hz Controls box Isolator Applies to: EKF450E3 EKF500E3 EKF560E3 Variable speed 400V, 3Ph, 50Hz Controls box Isolator Applies to: EKF450E3 EKF500E3 EKF560E3...
-
Page 7: Servicing And Maintenance
The motor has a status LED integrated into its cover. The LED will stay on constantly during normal operation and stay off when there is no power to the motor. In fault condition, the LED will flash in multiple sequences. Please refer to Vent-Axia Technical Support for more information should this occur. Servicing & Maintenance WARNING: THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE ISOLATED FROM THE POWER SUPPLY DURING MAINTENANCE. - Page 8 SALES ENQUIRIES: Tel: 0844 8560590 Fax: 01293 565169 TECHNICAL SUPPORT: Tel: 0844 8560594 Fax: 01293 539209 For details of the warranty and returns procedure please refer to www.vent-axia.com or write to Vent-Axia Ltd, Fleming Way, Crawley, RH10 9YX 405570 B 1015...