Table of Contents
Advertisement
[4] Main menu
Enter the main menu, you can view and set thermal imager isotherms, measurements, voice notes, system settings, files, SD
card, and about the machine and other options.
Isotherm - open and close the isotherm function, set isothermal temperature and isothermal type.
Temperature measurement - add or delete the temperature measurement line, set temperature correction and level / span.
In the "temperature correction" option, you can set the transmissivity, test distance, ambient temperature, reflected
temperature, humidity and correction temperature according to the actual ambient temperature. In the "horizontal / span"
option, you can set specific parameters for patterns and levels and spans.
Voice annotation – voice recording and playback.
System setting- set auto power off, Date and time, language, system, unit, etc. Factory settings can be restored under this
menu.
File - you can see the system directory name and the number of documents and other information.
SD card – set SD card connection mode, select the default built-in memory card, the images can be saved to the SD card.
When the mode switch to the "USB flash", the imager contacted with the PC, you can view files in the SD card by PC, and
the thermal imager can't take pictures.
About the machine -you can see the relevant information about the thermal imager.
[5] [6] [7] [8] Direction keys
The arrow keys include up, down, and left and right, referring to 5, 6, 7, 8, respectively.
[9] F2 Measurement key
Set the camera display mode, palette, flashlight and laser light switch, add and delete spot, line, area, picture view, etc..
Add temperature spots - manually set the temperature measurement spots one by one. Select spot and click on the arrow
keys to move it.
Add temperature areas - manually set the temperature measurement areas one by one. Select area and click on the arrow
keys to move it.
High and low temperature capture switch - after capturing high and low temperatures, the maximum and minimum values
in the temperature range are displayed at the top of the screen, while the maximum and minimum temperature points are
marked with H and L respectively.
Emissivity - adjusted emissivity ratio, which adjusts the emissivity of the thermal imager
Commonly used materials - enter common material options, you can choose the emissivity of commonly used materials,
after the election, you can set the emissivity of the thermal imager to the corresponding value.
Advertisement
Table of Contents
