Fault Countermeasures - Omega Ti-400 User Manual

Fault Countermeasures

If you have a problem with the thermal imager, check it out by the table below. If not work, please contact our authorized
agent or our maintenance department.
Cannot power on
Automatic power off
Battery consumption fast
Inactive thermal image
Thermal image color changed
Symptom Causes and Solutions
⚫
No battery or inaccurate battery installation.
→Load the battery or reinstall the battery
⚫
Battery runs out.
→Change battery.
⚫
Thermal imager power off protection
→Wait 10 seconds to power on.
⚫
Battery runs out.
→Change battery.
⚫
Automatic power off is turn on
→Turn off this function.
⚫
The environment temperature is too low
⚫
Battery is not fully charged.
→re-charge the battery.
⚫
The life of battery runs out.
→buy new battery.
⚫
The lens cover is not open.
→Open the cover.
⚫
Freeze image status.
→Press the return key to go back to active
mode.
⚫
Select different palette.
→Select the palette you want.