Table of Contents
Advertisement
[1] Power On / Off
Used for thermal imager on and off. Pressing the key more than three seconds, turn on / turn off the imager. After turn on,
this key is used as the return key.
! Attention： After turn off, it is recommended to wait at least ten seconds before turn on to ensure the safety of the
thermal imager.
[2] Power on indicator
Indicator is green after turn on.
[3] Charging indicator
After the connection of the power adapter, if the battery is installed correctly, the red charging indicator lights up. When the
charging is complete, the charging indicator will go out; if the battery is not installed correctly, the red charging indicator will
flicker continuously
Advertisement
Table of Contents
