Table of Contents
Advertisement
3.1.3 Work Interface
1
2
3
[1] Temperature area: rectangular area
[2] Point temperature mark: white cross cursor.
[3 Battery status: shows current battery status.
[4] System time
[5] Emissivity: set emissivity.
[6] NUC
[7] Lower limit temperature: lower limit value of color mark temperature.
[8] Color bar: color bar, different color palettes correspond to different color scales.
[9] Upper limit temperature: upper limit value of color code.
! Note: different modes have different functions. Therefore, all the signs in the interface are not necessarily displayed
under various modes.
3.1.4 Taking Picture
⚫
After installing the battery, press the thermal imager power switch (greater than 3 seconds) until the boot screen
appears. After about 50 seconds, the instrument is initialized and entered the working state.
⚫
Open the lens cover, aim at the target, adjust the focus of the camera lens, and make the target image clear.
⚫
When shooting an image, the main screen displays the name and file name of the save file for the image.
! Note： Unclear focus leading to inaccurate measurement.
4
5
9
8
7
6
Advertisement
Table of Contents
