Subscribe to Our Youtube Channel
Related Manuals for Scientific Industries Vortex-Genie 2 Series
Summary of Contents for Scientific Industries Vortex-Genie 2 Series
- Page 1 80 Orville Drive, Suite 102, Bohemia, NY 11716 U.S.A. (631) 567-4700 • Fax: (631) 567-5896 • Toll Free: 888-850-6208 Customer Service: custsvc@scientificindustries.com www.scientificindustries.com U.S.Pat. 4,781,487; 5,707,861...
- Page 2 We recommend you retain the original packaging for 90 days in case you need to return the product for any reason to your distributor or Scientific Industries. Your VORTEX-GENIE 2 Mixer is supplied with a Pop-off Cup located in the white foam box insert and a 3-inch Platform.
- Page 3 switch into the OFF position. In this mode, you may use any of the accessory ® attachments available for the VORTEX-GENIE 2 Mixer. Review instruction No. 3.0 before attempting to change attachments. Note: The speed control switch should be set between positions 3 and 10 to enable the mixing action to start.
- Page 4 230V Line Cord, Swiss Plug ESP0005 Micro Switch 0K-0286-901 100V Line Cord EPP0005 Speed Control 120V ECP0021 Australian Plug (only) EB-0246-500 Speed Control 240V EB-0286-500 Speed Control 100V ® Vortex-Genie Scientific Industries © Scientific Industries Inc. 2015 065-0004-00 Rev. X...
Need help?
Do you have a question about the Vortex-Genie 2 Series and is the answer not in the manual?
Questions and answers
Hello, I **** reaching out to request more information on the proper procedure/ protocol for decontaminating the Vortex Genie 2. I was having trouble finding the complete decontamination process on the website and in the manual, so I would greatly appreciate any information you can provide. Thank you
To properly decontaminate the Scientific Industries Vortex-Genie 2 Series:
1. Unplug the device: Ensure the unit is disconnected from the power source before cleaning.
2. Avoid immersion: Do not immerse the device in water or any liquid.
3. Clean the finish: Wash the surface using water and soap or detergents with a cloth or sponge.
4. Dry spills immediately: Blot any spills as soon as possible to maintain cleanliness.
5. Avoid unnecessary exposure: Prevent exposure to fumes or wet conditions during cleaning.
Ensure the unit is completely dry before reconnecting it to the power source.
This answer is automatically generated
I need the vortex to be set to 2000. What number on the dial is equal to not faster than 2000 please. Thank you!