Scientific Industries MULTIPLATE GENIE SI-4100 Operating Instructions

SI-4100 North American
SI-4101
(C14 Socket)
SI-4102
SI-4103
SPECIFICATIONS
Supplied
Electrical
Speed
Vortexing Orbit
Maximum Load
Pulse ON/OFF
Timer - Hands Free
Dimensions (D x W x H)
Weight
Environmental
Markings/Warranty
Caution
If this equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Unplug from power before cleaning. Do not immerse.
Do not position the equipment so that it is difficult to disconnect the power cord.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Care and Handling
Your MULTIPLATE GENIE
appliance. Unplug unit and wipe housing with damp cloth and detergent. Blot any spills
immediately.
Specifications
The MULTIPLATE GENIE
2" and "Pollution Degree 2". Indoor use only in elevation up to 2000m of altitude.
MULTIPLATE GENIE TM is a trademark of Scientific Industries
© Scientific Industries Inc. 2022
(Type B)
No Plug
Euro
(Type F)
UK
(Type G)
4 microplates
120-240V, 1.5 Amps, 47-63 HZ
Approx. 750-3200 RPM (60Hz), 750-2700 RPM (50Hz)
1.0 mm (.039 in) diameter
0.5 Kg (1.1 lbs)
1 sec - 99 minutes or continuous
1 sec - 99 minutes or continuous
383 x 261 x 152mm (15.1 x 10.3 x 6.0 in)
5.9 Kg (13.0 lb)
0°C - 38°C (32°F-100°F), 95% Humidity max
CE / 2 Years
should be given the care normally required for any electrical
TM
TM is classified as "Installation Category 2", "Overvoltage Category
SI-4104
(Type N)
SI-4105
(Type B)
SI-4106 Australia
(Type I)
Swiss
Japan
LTP0093 Rev-