Activating - Deactivating The Zones; With User Code 1 - LEGRAND 5739 46 User Manual

2 - Operation
■

Activating - deactivating the zones

You can deactivate (reactivate) one or more zones at any time. This
will allow you to personalise the burglar-alarm operation according to
your needs.
For instance, if you want to have protection even if you're not at home,
you can deactivate the infrared detector zones, leaving the outer zones
(entrance door and windows) active. This will allow you to move around
freely inside your house without making any alarms go on and without
giving up safety.
The zones in which your burglar alarm is split into appear in the fi rst
line of the display.
The active zones are shown in a dark box.
The following example shows the system made up of 4 zones, all active;
zone 3 is deactivated.
✔
With user code
The zones (max. 4) of the system are all
active (e.g. 1-2-3-4)
Press the corresponding key on the Unit
keypad to deactivate zone 3
Press the key
Type in the user code (basic 00000) or
an enabled numeric code
The display shows zone 3 without the
dark box (deactivated)
14
1 2 3 4
15/11/08 15:05
3
1 2 3
4 5 6
7 8 9
0
1 2 3 4
15/11/08 15:05