Table of Contents
Advertisement
2 - Operation
■
Accessing the functions with concealment
enabled
The Concealment function can be used to prevent displaying of the sy-
stem status to anyone without a user code or an enabled transponder.
When the Concealment function is
active, the display shows the Logo
To access the connector menu
press
Enter the user code (default 00000), or
an enabled numeric code, or place an
enabled transponder near the reader
for four seconds
If the code is correct, it will be possible
to access the start page. If no keys
are pressed for 10 seconds, the
concealment screen will reappear
■
✔
When the burglar alarm (antitheft) is
disabled, an open lock appears in the
middle of the display
Press the key
Type in the user code (basic 00000) or
Code/Key
an enabled numeric code; typing an
*
incorrect code, after the third attempt the
keypad blocks for about 1 minute
Code/Key
* * * * *
The display will show a closed lock;
if the sound system is enabled, you
1 2 3 4
–– –– –– ––
will hear an "enabled" vocal message;
execute the same operation to disable
the burglar alarm
15/11/08
15:01
12
Enabling - disabling the burglar alarm
With user code
1 2 3 4
15/11/08
15:02
1
2
3
4
5
6
7
8
9
0
1 2 3 4
15/11/08
15:02
Advertisement
Table of Contents
