Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Blaupunkt Manuals
  4. Dash Cameras
  5. BC TY 1.0
  6. Operating and installation instructions

Blaupunkt BC TY 1.0 Operating And Installation Instructions

Reverse camera
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
REVERSE CAMERA
BC TY 1.0
Enjoy it.
Operating and Installation Instructions

Advertisement

loading

Related Manuals for Blaupunkt BC TY 1.0

Summary of Contents for Blaupunkt BC TY 1.0

  • Page 1 REVERSE CAMERA BC TY 1.0 Enjoy it. Operating and Installation Instructions...
  • Page 2 Disclaimer in conjunction with this reverse camera. In no event shall Blaupunkt be liable for any Attentions direct, indirect, punitive, incidental, special consequential damages to property or life •...

  • Page 3: Specification

    SPECIFICATION Features BC TY 1.0 Image Sensor CMOS TV System NTSC/PAL Effective Pixels 720 (H) x 480 (V) Image Resolution 750TVL Frame Frequency 25/30 fps Exposure Automatic Gain Control Automatic Electronic Shutter 1/60~1/100000sec Auto White Balance Auto (2500K~9500K) Illumination Min.

  • Page 4: Installation Diagram

    INSTALLATION DIAGRAM Black Wire (Ground) Display Monitor/ Car Radio Reverse Camera Reverse Light Ground the wire through the exterior body of the vehicle and keep connection intact. Display Monitor/Car Radio Reverse Camera Attention • Remove protective film from camera lens before use. •...
  • Page 5 FRONT / REAR CAMERA INSTALLATION REAR CAMERA (Pickup Car, Truck) White Camera Monitor Blue Video Purple Rear Power Reverse Camera Reverse Camera Do not cut the wires when Cut white and purple wires when using as reverse camera near using as reverse camera on rear license plate.

  • Page 6: Troubleshooting

    TROUBLESHOOTING If any of the following problem occur, please resort to Troubleshooting for the possible solutions. Consult Blaupunkt authorized dealer if problem persist. Problem Solution Display monitor / car radio does not Restart the display monitor / car radio.

  • Page 7: Installation Location

    INSTALLATION LOCATION Remove one side of Connect the reverse the reverse light light power cable to socket from its the camera, screwn housing then remove the housing & camera Tail the bulb from its back into position socket. with a screwdriver. Light Use a screwdriver Mount the camera...
  • Page 8 Designed and engineered by Blaupunkt Competence Centre 1 331 19 006 32 02...