Table of Contents
Advertisement
14.5 SETTINGS MENU.
The settings menu gives access to several sub-menus.
Settings
Input filter
ALC
ALC threshold
On
Settings
ALC speed
Beep
File format
On
Settings
File format
Backlight
Output level
Automatic
14.5.1 INPUT FILTER.
Input filter
Flat
Low cut
Flat
14.5.2 ALC.
ALC
On
Off
On
14.5.3 ALC THRESHOLD.
ALC threshold
-74 dB
Using +/- keys
Using +/- keys
Issue: July 18, 2006
Settings
ALC
ALC threshold
ALC speed
Using +/- keys
The current setting of each is always shown at the bottom of the display.
Two possibilities are available: FLAT or LOW CUT .
When LOW CUT is selected, on the main display, the text
appear next to the battery status.
From this sub-menu, the ALC can be switched ON or OFF .
It is highly recommended to switch on the LOW CUT filter if ALC is
turned ON.
The THRESHOLD can be adjusted from 104 dB to 74 dB.
In this case the + key (8) and the - key (7) are disabled. If USING +/-
KEYS is selected, the + key (8) and - key (7) are enabled during
STOP and RECORD mode, which allows the THRESHOLD level to
be adjusted without returning in the SETTINGS menu.
Settings
Beep
File format
Backlight
MPEG 128/48
Settings
ALC threshold
ALC speed
Beep
Normal
will
Page 21
Advertisement
Table of Contents
