Ricoh Pro L5160 Care And Maintenance page 25

5. Check the message on the control panel, and then open the right cover.
6. Remove the two fixed screws, and then remove the left cover.
The removed screws will be used when refixing the cover.
1
2
7. Apply cleaning liquid to a cleaning stick, and then use it to wipe off any dust and dirt on
the area around the print heads.
• Wipe off completely so that no cleaning liquid remains.
• Do not touch the nozzle faces when cleaning the area around the print heads. If a cap mark
or dirt is left on the nozzle faces of the print heads, see page 31 "Cleaning the Nozzle
Faces of the Print Heads".
DWT183
DWT304
DWT305
Performing Maintenance Once a Year
23