Checking The Installation - Siemens SIWAREX WL280 Operating Instructions Manual

5.2.7

Checking the installation

Procedure
NOTICE
Destruction of the load cell and the pressure piece set
Check that the load cell and pressure piece set are installed correctly, e.g. by checking the
mounting dimensions and oscillation distances. Incorrect assembly can lead to the
destruction of the load cell and the pressure piece set.
Check the installation of the load cell:
1. The load bearing implement must be able to oscillate freely.
2. The pendulum support should be aligned as vertically as possible.
RN-S SA
Operating Instructions, 09/2013, A5E32962759A-01
5.2 Mounting the pressure piece set
Installation
27