York YCWL0056SE Installation Operation & Maintenance page 97

FORM 201.26-NM1
ISSUE DATE: 1/19/2018
ELASTOMETRIC ISOLATOR CROSS-REFERENCE
H F
1. All dimensions are inches, interpreted per ANSI
Notes:
Y14.
1. All dimensions are inches, interpreted per ANSI Y14.
2. Refer to Page 98 for installation instructions.
2. Refer to next page for installation instructions.
3. Mount molded in weather resistant duralene compound as standard. Also available in other materials
such as natural rubber, extreme high temperature silicone, high-damped silicone, nitrile and EDPM.
4. AL = Mounting hole center to center spacing.
3. Mount molded in weather resistant duralene com-
5. HF = Free height of mount, prior to loading. Operating height calculated by the free height less the
pound as standard. Also available in other materi-
static deflection under load. All dimensions for reference only.
als such as natural rubber, extreme high tempera-
6. Hardware zinc-electroplated.
ture silicone, high-damped silicone, nitrile and
EDPM.
MOUNT
TYPE
L
RD1-WR 3.13
RD2-WR 3.88
RD3-WR
5.50
RD4-WR 6.25
MODEL NUMBER
RD-3-CHARCOAL-WR
RD-4-BRICK RED-WR
RD-4-CHARCOAL-WR
JOHNSON CONTROLS
Units shipped on or after June 15, 2008
RD-Style Isolators
DW
CD
AL
L
DIMENSION DATA (INCHES)
W HF AL
1.75 1.25 2.38
2.38 1.75 3.00
3.38 2.88 4.13
4.63 2.75 5.00
ISOL. COLOR WEIGHT RANGE (LBS) WEIGHT RANGE (KGS)
CHARCOAL Up thru 825
BRICK RED 826 thru 1688
CHARCOAL 1689 thru 4000
SECTION 5 – TECHNICAL DATA
MOLDED
DURULENE
ø
A D THRU
TYP 2 PLACES
BT
W
4. AL = Mounting hole center to center spacing.
5. HF = Free height of mount, prior to loading. Op-
erating height calculated by the free height less
the static deflection under load. All dimensions
for reference only.
6. Hardware zinc-electroplated.
AD BT
0.34 0.19 5/16-18 UNC X 3/4
0.34 0.22 3/8-16 UNC X 1
0.56 0.25 1/2-13 UNC X 1
0.56 0.38 1/2-13 UNC X 1
UP TO 374
375 - 766
767 - 1814
LD13760A
CD DW
1.25
1.75
2.50
3.00
YORK P/N
029-25335-001
029-25335-002
029-25335-004
97
5