Table of Contents
Advertisement
Screw
Screw
Screw
Screw
Lamp Plate
Lamp Setup for MQLOGF48 Oak Log Set , MQLOGF48D Driftwood Log Set:
STEP 3: Place Lamps in firebox as shown above. Rear Lamps face back wall of firebox, and front lamps are pointed
upward. Attach Lamp Mount Brackets to fireplace with [2] screws at the locations shown. Replace Burner, Ember Plate,
and Grate Bar.
LOG HOLDER REMOVED
FOR GLASS TRAY
Screw
Screw
Screw
Screw
Lamp Plate
Lamp Setup for MQZCV48GT Glass Tray:
STEP 4: Place Lamps in firebox as shown above. Rear Lamps and Front Lamps are all pointing upward. Attach Lamp
Mount Brackets to fireplace with [2] screws at the locations shown. Do not replace Burner, Ember Plate, or Grate
Bar. Refer to MQZCV48GT installation section of manual.
33
Hide quick links:
Advertisement
Table of Contents
