AEG ABE81826NC User Manual page 20

20 www.aeg.com
It is possible to change predefined
sound of buttons by pressing together
3.2 Display
A
3.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off. The temperature
indicators show the set default
temperature.
The alarm buzzer could
operate after few seconds.
To reset the alarm refer to
"High temperature alarm".
To select a different set temperature
refer to "Temperature regulation".
If "dEMo" appears on the display, refer
to "Troubleshooting" .
3.4 Switching off
1. Press the appliance ON/OFF for 5
seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.
3.5 Temperature regulation
Set the temperature of the appliance by
pressing the temperature regulators.
Default set temperature:
• -18°C for the freezer
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
B C
F E D
Mode and temperature colder button for
a few seconds. Change is reversible.
A. Timer indicator
B. FROSTMATIC function
C. Temperature indicator
D. Alarm indicator
E. ChildLock function
F. MinuteMinder function
3.6 High temperature alarm
An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure) is indicated by
flashing the alarm icon and freezer
temperature indicators, and sounding of
buzzer.
Press any button.
The buzzer switches off.
The freezer temperature indicator shows
the highest temperature reached for a
few seconds, then displays the set
temperature again.
The alarm indicator
continues to flash until the
normal conditions are
restored.
3.7 FROSTMATIC function
The FROSTMATIC function accelerates
the freezing of fresh food and, at the
same time, protects foodstuffs already
stored from undesirable warming.
1. To activate this function press the
Mode button until the corresponding
icon appears.
The FROSTMATIC indicator flashes.
2. Press the OK button to confirm.
TheFROSTMATIC indicator is shown.
This function stops automatically after 52
hours.
To switch off the function before its
automatic end repeat the procedure
until the FROSTMATIC indicator turns
off.
The function switches off by
selecting a different set
temperature.