Changing The Vacuum Pump Oil - Waeco AirConServiceCenter ASC5100G Operating Manual

Service tasks
9.5

Changing the vacuum pump oil

!
WARNING!
Switch off the AirConServiceCenter and unplug it from the power
supply before opening the housing.
1. Before changing the oil, let the vacuum pump run for about
10 minutes (manually, via the menu).
!
CAUTION!
The following steps may only be performed by qualified personnel.
2. Take off the front panel:
Undo the screws (D) on the control panel and lift it up. Then undo the
screws (E) on the bottom of the front panel and take it off.
96
D
E
ASC5100G
D
E
EN