Installation and Operations Manual — Model 400 Series
grease fittings. The wheels may be pre-greased. Be careful not to over-
grease the bearings; make sure the grease does not leak out of the sides of the
bearings.
2.3.8 Install the four guide wheels into the guide wheel receivers on the wheel
stanchion. Leave the bolts fully backed off to allow the guide wheels to
insert completely into the receivers.
Figure 2.3 – Interior View of Motor Stanchion
B&B ARMR
A Division of B&B Roadway and Security Solutions
TROUBLESHOOTING
04X0 Rev G
15