Status Indicators; The Rst Button - Tainet Comet 16 Series User Manual

Comet 16xx Series User's Manual
3.1.1

Status Indicators

The status indicators of the Comet 16xx Series are depicted in Table 3-1.
There are nine LEDs, which are PWR, TST, CPE, ALM, DSL1, DSL2, V35,
E1 and LAN. These nine LEDs display the system status.
LED GREEN
PWR Power ON
TST
CPE STU-R
ALM System Alarm occur
DSL1-2 DSL Link
V35 In Service
E1 In Service
LAN Ethernet Link
3.1.2

The RST Button

There is only one Reset button to manually reset the device.
11
Table 3-1 Indicators on Front Panel
YELLOW RED
Testing
DSL Alarm
V35 Alarm
E1 Alarm
Full Duplex
Flashing
DSL handshake
Data tx/rx
Data tx/rx
Ethernet active
OFF
Power OFF
No Test
STU-C
No Alarm
No Used
No Used
No Used
Link Down