Chapter 2. Specification; Main Features - Tainet Comet 16 Series User Manual

Comet 16xx Series User's Manual
Chapter 2.
To let the user understand the TAINET Comet Series, this chapter begins with its main
features. Then, the chapter continues to present SHDSL and SHDSL.bis interface, the
network side interface, timing and synchronization, OAM (Operation, Administration
and Maintenance) and technical specifications. The last part of this chapter is devoted
to the applications of TAINET Comet 16xx Series in different networks.
2.1

Main Features

Listed below are the main features of the Comet 16xx Series:

Listed below are the main features of the Comet 16xx Series.

Support loop interface G.SHDSL and G.SHDSL.bis.

Comet 16xx Series supports DTE interface: E1, DATA (V.35, X.21, RS-530,
V.36 / RS449) and Ethernet.

Carrying symmetrical 5.696 Mbps, 11.392Mbps, 22.784Mbps for up to 1.8
miles / 3 Km over 24-AWG single pair copper wire.

Carrying symmetrical 2048 Kbps payload for up to 2.4 miles / 3.9 Km over
26-AWG single pair copper wire.

Automatic line rate selection with Line Probe enabled.

Support SHDSL and SHDSL.bis payload rates of n ×64Kbps, where n is 3 to
89 in 2 wires, where n is 6 to 178 in 4 wires, where n is 12 to 356 in 8 wires.

Support Timing and Synchronization: Local (internal) timing, Line timing (loop
received clock).

For test and diagnostic purpose the Comet provides local and remote
loopback function.

Management by CID, Telnet and Web.

Remote control / monitoring via Telnet and Ethernet.

Remote in-band control / monitoring CPE via G.SHDSL EOC.
3
Specification