Table of Contents
Advertisement
SECTION 5: CARE & MAINTENANCE
Cleaning & Ongoing Maintenance
With proper maintenance, your table is designed to give you years of trouble-free operation.
To ensure your table will continue to function properly and keep its appearance, we
recommend the following.
Category
Upholstery
Lubrication &
Mechanical
Electronics
Leveling Feet
6
DO NOT USE acetone, "Armor All" type cleaners, citrus-based cleaners,
or industrial cleaners. These can seriously damage the upholstery. Such
damage would not be covered under warranty.
Remove day-to-day dirt and smudges with a mild soap and water solution.
For tough stains and to disinfect, use a (100 to 1) water to bleach solution.
Spray a damp cloth with the solution to clean.
After each cleaning, gently wipe the upholstery with a damp cloth and clean
water, then allow upholstery to air dry before using or storing.
For more difficult stains, please contact your dealer or please call us directly
for guidance. For best results, use only the products suggested above.
The actuator or mechanical lift is maintenance free. Do not lubricate. Be
careful to avoid application of sticky substances to the mechanism.
Anti-static electronic aerosol dusters can be used to keep the surfaces of
electronic components, power cables, and plugs free of dust.
Regularly check to ensure the table is level and stable.
See page 5 for leveling instructions.
Care Recommendation
Advertisement
Table of Contents
