Siemens VDO EDM eco Release II Operating Instructions Manual page 95

EDM eco
Operating instructions
Changing the distance travelled calibration values
If the distance travelled gauge on the consumption display unit
• indicates that the total number of kilometres travelled is less than that shown on the vehicle
instrumentation, you must increase the distance travelled calibration value.
• indicates that the total number of kilometres travelled is more than that shown on the vehicle
instrumentation, you must reduce the distance travelled calibration value.
If several vehicles of the same type are fitted with the same type of tyres, a calculated calibration
value can be used for all these vehicles
TU00-1404-0311020
5 After you have completed all entries, press the
normal display mode.
1 Press the key and the
settings.
86(U 6HW83
The first menu item
6\6W( 6HW83
>
2 Select the
> >
(- 27) menu item (- 31).
If PIN protection has already been activated, you will automatically be asked
to enter the system PIN number in the place indicated (-> 24).
© Siemens VDO Trading GmbH
key until you return to the
key at the same time to switch to the unit
will be displayed automatically.
&$/ 6\6W( G,V7 &$/ &RQ6W G,6W
> >
Unit settings
43