Before You Start; Checking What's In The Box; Controls And Displays - TAD -M600 Owner's Manual

BEFORE yOU START

Checking what's in the box

Please check that you have received the following supplied accessories in the accessory box.
Power cord x 1
'
Spike bases x 4
'

Controls and displays

Front panel
1
1. Power indicator
Indicates whether the power is turned on or off. The indicator
will light red during start up or if there is a malfunction. The
indicator will light yellow when the unit is ready to operate.
If the power indicator light turns from yellow to red, turn off
the power and refer to Protection circuit on page 13. If the
trouble is still not resolved, ask your dealer.
2. Power switch
Press to turn the power on/off. Flip the switch to the right to
turn the power on; flip the switch to the left to turn the power
off.
6
Hexagon wrench x 1
'
Spike base template x 1
'
Operating Instructions (this document)
'
OFF ON
2
Rear panel
INPUT
(BALANCED)
A SPEAKERS
3 4
3. INPUT terminal (BALANCED)
Connect to Pre-Amplifier.
4. AC IN connector
Connect the accessory power cord here.
5. SPEAKERS terminals
Connect speakers with impedance of 4 Ω to 16 Ω.
B
5