Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Aeon Labs Manuals
  4. Controller
  5. Aeotec
  6. User manual

Aeon Labs Aeotec User Manual

Hide thumbs Also See for Aeotec:

Advertisement

Quick Links

Download this manual
17.09.2018
Garage Door Controller Gen5 user guide.
Modified on: Tue, 11 Sep, 2018 at 10:52 AM
Aeotec by Aeon Labs Garage Door Controller.
Aeotec Garage Door Controller has been crafted to power connected lighting using Z-Wave Plus
. It is powered by Aeotec's Gen5
wave-plus)
Garage Door Controller
To see whether Garage Door Controller is known to be compatible with your Z-Wave system or not, please reference
our Z-Wave gateway comparison
Garage Door Controller
can be viewed at that link.
specifications-)
.
Get to Know Your Garage Door Controller.
https://aeotec.freshdesk.com/support/solutions/articles/6000053811-garage-door-controller-gen-5-user-guide-
Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs
(http://aeotec.com/z-wave-gen5)
(http://aeotec.com/z-wave-garage-door-controller)
(http://aeotec.com/z-wave-gateways)
(https://aeotec.freshdesk.com/solution/articles/6000168304-garage-door-controller-technical-
technology. You can find out more about
by following that link.
listing. The technical specifications of
(http://aeotec.com/z-
1/11

Advertisement

loading
Need help?

Need help?

Do you have a question about the Aeotec and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aeon Labs Aeotec

Summary of Contents for Aeon Labs Aeotec

  • Page 1 Garage Door Controller Gen5 user guide. Modified on: Tue, 11 Sep, 2018 at 10:52 AM Aeotec by Aeon Labs Garage Door Controller. Aeotec Garage Door Controller has been crafted to power connected lighting using Z-Wave Plus (http://aeotec.com/z- . It is powered by Aeotec’s Gen5 technology.

  • Page 2: Important Safety Information

    Important safety information. Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and / or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.
  • Page 3 2. Add/include/link your Garage Door Controller to a Z-Wave network. The following instructions will tell you how to link your Garage Door Controller to your Z-Wave network via an Aeotec by Aeon Labs’ Z-Stick or Minimote controller. If you are using another Z-Wave controller as your main controller, please refer to their respective manual on how add new devices to your network.
  • Page 4 17.09.2018 Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs 1. Connect 5V DC Adapter to the Garage Door Controller. Its Network LED will begin to blink. 2. If your Z-Stick is plugged into a gateway or a computer, unplug it.
  • Page 5 17.09.2018 Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs LOCATE CONTROL BUTTON a) WITHIN SIGHT OF DOOR; b) AT A MINIMUM HEIGHT OF 1.53 M (5 FT) SO SMALL CHILDREN CANNOT REACH IT; AND c) AWAY FROM ALL MOVING PARTS OF THE DOOR.
  • Page 6 17.09.2018 Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs Note: The Fast Wiring Clip need to be used with pliers. When the Switch Cable and the Motor Switch Cable have been connected by Fast Wiring Clip, you will need to use the pliers to clamp the Fast Wiring Clip, see the figure above.
  • Page 7 17.09.2018 Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs 3. Affix your sensor mounting plate to the garage door. The sensor mount plate should be installed on the top of the garage door (on the left, middle, or right side). Now affix your sensor mounting plate to the surface.
  • Page 8 17.09.2018 Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs Press and hold the Latch Button, and then push the Sensor into the mounting plate. Test Garage Door Controller. After completing all installation steps, you may need to test your Garage Door Controller to see if it has been successfully installed.

  • Page 9: Advanced Instructions

    The following instructions will tell you how to remove your Garage Door Controller from your Z-Wave network via an Aeotec by Aeon Labs’ Z-Stick or Minimote controller. If you are using another Z-Wave controller as your main controller, please refer to their respective manual on how remove devices from your network.
  • Page 10 17.09.2018 Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs If you’re using a Z-Stick: 1. If your Z-Stick is plugged into a gateway or a computer, unplug it. 2. Take your Z-Stick to your Garage Door Controller.

  • Page 11: Other Configurations

    17.09.2018 Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs Your Garage Door Controller will now be reset to its original settings, and the Network LED will be solid for 2 seconds and then start slow blinking to confirm a success.

This manual is also suitable for:

Garage door controller gen5