Operation Manual – System Maintaining and Debugging
H3C S9500 Series Routing Switches
Figure 1-1 The relationship between the protocol and screen debugging switch
1.2 System Maintaining and Debugging
1.2.1 System Maintaining
To do...
Check whether a
specified IP
address can be
reached
View the routes
from the source to
the destination
Use the command...
ping [ ip ] [ -a source-ip | -c count |
-f | -h ttl | -i interface-type
interface-number | -m interval | -n
| -p pad | -q | -r | -s packet-size | -t
timeout | -tos tos | -v |
-vpn-instance
vpn-instance-name ] *
remote-system
ping [ ipv6 ] [ -a source-ip | -c
count | -m interval | -s packet-size
| -t timeout ] * remote-system [ -i
interface-type interface-number ]
tracert [ -a source-ip | -f first-ttl |
-m max-ttl | -p port | -q
packet-number | -vpn-instance
vpn-instance-name | -w timeout ] *
remote-system
tracert [ ipv6 ] [-f first-ttl | -m
max-ttl | -p port | -q
packet-number | -w timeout ] *
remote-system
1-3
Chapter 1 System Maintaining and Debugging
Optional
Used in IPv4 network
Available in any view
Optional
Used in IPv6 network
Available in any view
Optional
Used in IPv4 network
Available in any view
Optional
Used in IPv6 network
Available in any view
Remarks