2-3.5 Cmos Clearing (Jp5) - SOYO SY-K7VTA MOTHERBOARD SY-K7VTA User Manual

Hardware Installation

2-3.5 CMOS Clearing (JP5)

After you have turned off your computer, clear the CMOS memory by
momentarily shorting pins 2-3 on jumper JP5, for a few seconds. Then
restore JP5 to the initial 1-2 jumper setting in order to recover and retain
the default settings.
Jumper JP5 can be easily identified by its white colored cap.
CMOS
Clearing
Short pin 2-3 for
at least 5 seconds to
JP5 Setting
clear the CMOS
Note: You must unplug the ATX power cable from the ATX power
connector when performing the CMOS Clear operation.
Clear CMOS Data
43
Retain CMOS Data
Short pin 1-2
to retain new
settings
1 2 3
SY-K7VTA
1 2 3