Specifications - Racal Instruments 5601 User Manual

35601 User's Manual
Input Characteristics
Connector
Impedance
Damage Level
Frequency Range
Output Characteristics
General
Connector
Impedance
Protection
Gain
Polarity
Amplitude
Square Wave Characteristics
Transition Time
Aberrations
Sine Wave Characteristics
Small Signal
Bandwidth
Accuracy
Flatness (10Vp-p)
THD
Harmonics
General
Physical Size
Current Consumption
Power Requirements
Signal Ground
EMC Certification
Reliability
Safety
Workmanship Std.
Environmental
Operating Temperature
Storage Temperature
Racal Instruments Ó 2003
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
BNC
50W or 1MW, DC coupled
10Vp-p
DC to 20MHz
BNC
50W, 75W, or 600W, DC coupled
Short-circuit, 10 seconds
x10, fixed (can be ordered from factory with different gain setting)
Output normal, or inverted
0 to 20Vp-p into matching impedance (50W, 75W, or 600W)
0 to 40Vp-p into high impedance
<15ns
<5%
50 MHz (-3dB) at 2Vp-p
±(2% of full-scale amplitude range + 25mV), 1kHz square wave
±5% of amplitude to 1MHz; ±10% of amplitude to 20MHz
0.1%, 10Hz to 100KHz
<-50dBc, 100KHz to 5MHz
<-40dBc, 5MHz to 20MHz (10Vp-p)
Single-slot, 3U-high PXI module
3.5 A maximum at +5V
7.2W maximum
Floated to the same level as the source, 250VDC maximum
CE marked
MTBF per MIL-HDBK-217E, 25 °C, Ground Benign
Designed to meet IEC EN61010-1, UL 3111-1
Conform to IPC-A-610D
0 °C to 50 °C, RH 80% (non-condensing)
-30 °C to 80 °C
Appendix A

SPECIFICATIONS

Specifications A1