Table of Contents
Advertisement
Operating
Instructions
1-8 Overview
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Being an analog device, Model 5601 has no controls or
computer-programmed settings. The following procedure is
recommended for proper operation of the power amplifier:
1. Make sure your card is configured for the desired input
and output impedance, gain, and grounding.
2. Follow the installation instructions given in Chapter 2 of
this manual.
3. Connect the output terminal to your load.
4. Connect the input terminal to your source.
5. Turn on power to your PXI system.
Model 5601 has no programmable disconnect
for its signal output. Therefore, the amplifier
output is active immediately after you power
up your PXI chassis. Always make sure the
load is protected from inadvertent power-up
conditions before you turn on your PXI
chassis.
5601 User's Manual
WARNING
Racal Instruments Ó 2003
Advertisement
Table of Contents
