Table of Contents
Advertisement
Preparation For
Use
Removing the
Instrument from
the Bag
Installation
2-6 Installation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Model 5601 is supplied in an anti-static bag. Check the seal on
the bag to make sure the bag was not opened in a static-unsafe
environment. Place the enveloped card on static-free surface
and wear a grounding strap. Then break the seal on the bag
and remove the instrument. Hold the 5601 at the metal panel
end. Refrain from touching the instrument with your finger at all
times.
Disconnect power to the PXI Chassis before
installing or removing the 5601. An attempt to
insert or remove the instrument while the
power is connected to the chassis will result
in severe damage to the instrument and will
automatically revoke your warranty.
Slide the 5601 into an empty slot of your PXI chassis. Push it
firmly into place as you lift its extractor handle to the horizontal
position. The metal panel should make contact with the metal
edge of the PXI chassis. Using a suitable screwdriver, tighten
the two retaining screws, top and bottom.
Once the 5601 has been installed in the
chassis, cover all remaining open slots to
ensure proper airflow. Using the 5601 without
proper airflow will result in damage to the
instrument.
5601 User's Manual
CAUTION
CAUTION
Racal Instruments Ó 2003
Advertisement
Table of Contents
