Campbell Hausfeld TL0539 Operating Instructions Manual page 5

5. Do NOT wear loose fitting clothing, scarves, neck ties or jewelry when
operating any tool. Loose clothing or jewelry may become caught in
moving parts and result in serious personal injury.
6. Do NOT depress trigger when connecting air supply hose to tool.
7. Do NOT put hands near or under moving parts.
cause injury to hands and arms. Stop using any tool if discomfort, numbness,
tingling or pain occur and consult a physician.
8. Check air hoses for weak or worn condition before each use. Make sure
ALL connections are secure.
9. Protect air lines from damage or puncture. Do NOT carry tool by air
hose.
10. NEVER trigger the tool when not applied to a work object. Attachments
MUST be securely attached. Loose attachments can cause serious injury.
11. ALWAYS use attachments designed for use with air powered tools. Do
NOT use damaged or worn attachments.
12. Keep ALL nuts, bolts and screws tight and ensure equipment is in safe
working condition.
13. ALWAYS secure workpiece in a vise or clamp. Do NOT place hands on the
back cylinder when operating the tool.
14. NEVER point an air tool at oneself or any other person. Serious injury
COULD occur.
operated without the safety cap installed.
The DANGER, WARNING, CAUTION, and NOTICE notifications and
instructions in this manual cannot cover all possible conditions and situations
that may occur. It must be understood by the operator that caution is a
factor which cannot be built into this product, but must be supplied by the
Safety glasses and ear protection MUST be worn
during operation.
Excessive exposure to vibration, working in
awkward positions and repetitive work motions can
Never operate the rivet gun without the safety cap
installed. Personal injury can occur if the rivet gun is
operator.
SAVE THESE INSTRUCTIONS
DO NOT DISCARD
3