Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Forza Manuals
  4. Tools
  5. 1300 Series
  6. User manual

Forza 1300 Series User Manual

External mechanical puller
Hide thumbs

Advertisement

Quick Links

Download this manual
External
mechanical puller
1300 series
User´s Manual
1300

Advertisement

loading
Need help?

Need help?

Do you have a question about the 1300 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Forza 1300 Series

Summary of Contents for Forza 1300 Series

  • Page 1 External mechanical puller 1300 series User´s Manual 1300...
  • Page 2 Revisado 13.07.18...

  • Page 3: Table Of Contents

    ÍNDICE 1. Tecnhical features 2. Dimensions of the puller 3. User manual 4. Jaws position 5. Spindle point 6. Exploded view...

  • Page 4: Tecnhical Features

    1. TECNHICAL FEATURES • Two and three jaws pullers. • Standard jaws (2 holes), long ones (3 holes) extra-long ones (4 holes). • For exteriors. • Forged jaws. 2. DIMENSIONS OF THE TWO JAWS PULLER Item number with L long jaws with X Extra long jaws. Reference Ton.
  • Page 5 2.1 DIMENSIONS OF THE THREE JAWS PULLER The height in the chart is the maximum vertical position. The opening is the maximum while opening at a 15 degrees angle. Combina con 2/3 patas Combine Reference Weight 1300T 1300LT 1301T 1301LT 1304T 1304LT 1307T...

  • Page 6: User Manual

    3. USER MANUAL 1. Make sure that the spindle is perfectly clean and greased. 2. Check that the shaft is punched otherwise use a point protector. 3. Make sure that jaws are evenly spread out from the spindle. 4. Apply the pulling force by turning the spindle. Never strike the spindle. 5.
  • Page 7 Figure 3 Figure 4 This series of puller can mount standard arms (05), long arms (06) or extra-long (16). The puller has more force when arms are set in the lowest holes. In this position arm bend less when applying great force (Figure 1). But if the spindle sticks out too much from the body it might bend when using the wrench (Figure 4).

  • Page 8: Spindle Point

    5. SPINDLE POINT Fixed spindle point (1300 to 1307) The spindles featuring a tempered point must be protected when the shaft is not punched. Spindle with retractable point (1310 and beyond) A Big size pullers come with a retractable point making the point protector uncessary. Following are the instructions how to use the aforesaid point.

  • Page 9: Exploded View

    6. EXPLODED VIEW Spare part 2 short arms Spare part 3 extra-long arms Spare parts 2 long arms “T” bodies of big pullers can be acquired equipped with the bronze nut and the cover. The references are: 131722, 133022 and 13522. (See comments from page 10).
  • Page 10 Spindle Reference Screw Point Puller 130003 M8 x 1 1300 / 1300T 130103 M10 x 1 1301 / 1301T / 1301L/1301LT 130403 M14 x 1,50 1304 / 1304T / 1304L/1304LT 130703 M18 x 1,50 1307 / 1307T /1307L/1307LT 131031 M20 x 1,50 Interchangeable 1310 / All models 131731...
  • Page 11 If the body is assembled in the inverted position, the M-5 screws will support all the load and they will break. Arms Extra-long jaw 16 Short jaw Long jaw Ref arms 130005 130006 130105 130106 130405 130406 130705 44,5 130706 44,5 131005 12,5...
  • Page 12 S.L. de Herramientas Especiales Forza C/ San Miguel de Atxa, 24 01010 Vitoria www.forza.es...