Specifications - Ryobi RPHD43O Operator's Manual

Model:
Engine type:
Engine displacement:
Max Engine power:
Gearbox reduction ratio:
Idle speed:
Clutch engagement speed:
Maximum engine speed:
Auger speed:
Auger diameter:
Auger length:
Extension shaft:
Fuel mix ratio:
Fuel tank volume:
Weight:
Fuel consumption:
Specified fuel consumption:
Note: Fuel consumptions - tested in accordance with 2012/46/EU at max engine power.
Vibrations - tested in accordance with ISO22867.
Sound levels - tested in accordance with ISO22868 at operator's position.
WARNING!
The declared vibration value has been measured with a standard test method and may
be used to compare one tool with another. The declared vibration value may be used in a pre -
liminary assessment of exposure. The vibration emission during actual use can differ from the
declared total value depending on the ways in which the tool is used. Identify safety measures
to protect yourself based on an estimation of exposure in the actual conditions of use, taking
account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time.

SPECIFICATIONS

RPHD43O
Air cooled 2-stroke
43 cc
1.25 kw / 6500 rpm
40:1
2800±280 rpm
4200±350 rpm
9000±350 rpm
200 - 230 rpm
200 mm
740 mm
300 mm
50:1
950ml
18 kg
610g/h
488g/(kw-h)
Vibration, right grip:
Vibration, left grip:
Sound pressure level:
Sound power level:
20
Idling 12.6 m/s
Racing 5.0 m/s
Uncertainty 1.5 m/s
Idling 14.1 m/s
Racing 5.8 m/s
Uncertainty 1.5 m/s
Idling 78.1 dB(A)
Racing 98.0 dB(A)
Uncertainty 3 dB(A)
Idling 89.2 dB(A)
Racing 109.1 dB(A)
Uncertainty 3 dB(A)
2
2
2
2
2
2