Packing List - Ryobi RPHD43O Operator's Manual

KNOW YOUR POST HOLE DIGGER
See figure 1 & 2
The safe use of this product requires an understanding of the information on the product and in this
operator's manual as well as a knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules.
AIRBOX
The airbox cover houses the air filter which helps to limit the amount of dirt and dust drawn into the
engine during operation.
CHOKE LEVER
The choke lever is used when starting the engine.
PRIMER BULB
The primer bulb is used to prime the carburetor prior to cold starting or if the unit has not been used
for a while.
GEARBOX
The gearbox transfers the engines RPM to a slower high torque output.
DRIVE SHAFT
The drive shaft is connected to attachments to transfer movement.
GUDGEON PIN AND COTTER PIN
The gudgeon pins and cotter pins secure the attachments to the drive shaft.
RECOIL STARTER GRIP
The recoil start grip is used (along with the engine switch) to start the engine. This product is Easy
Start capable so you can start this with the One+ Easy Starter tool (sold separately), rather than by
using the pull cord. Refer to page 11 for further information.

PACKING LIST

X3
FEATURES
10
1 x 200x740mm Auger Bit
1 x 300mm Extension Shaft
1 x 500ml Fuel Mixture Bottle
1 x Spark Plug Spanner
2 x Allen Keys
2 x Open Ended Spanners
1 x 76ml 2-Stroke Synthetic Oil
3 x Gudgeon Pins with Cotter Pins
1 x Operator's Manual
1 x Safety bar
1 x RPHD43O Engine Assembly