Ryobi RPHD43O Operator's Manual page 13

ENGINE SWITCH
This post hole digger is built with a lock-on engine switch which is used in combination with the recoil
starter grip to start the engine. It is also used to turn the engine off.
THROTTLE LOCK
The throttle lock is used to help the engine on cold starts.
THROTTLE TRIGGER
The throttle trigger helps the operator control the speed of the auger to suit various ground conditions.
TRIGGER LOCK
The trigger lock prevents the operator from accidently activating the throttle trigger. The trigger lock
must be depressed before applying the throttle.
SAFETY DEVICE CONTROL BOX AND SAFETY BAR
The patent safety device control box & safety bar prevent the engine head assembly from excessive
backward rotation in the case of jammed dill, which may cause the operator serious injury.
ONE+ EASY STARTER
This post hole digger can be started with the push of a button through the use of the One+ Easy
Starter (sold separately). Please refer to the included Quick Start Guide for detailed starting
procedure.
UNPACKING
Carefully remove the tool and any accessories from the carton. Make sure that all items listed in
the packing list are included.
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily operated
the tool.
WARNING!
If any parts are missing, do not operate this tool until the missing parts are replaced.
Failure to do so could result in possible serious injury.
WARNING!
Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such alteration or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
MOUNTING THE SAFETY BAR
See figure 3, 4 & 5
Remove the nylon lock nut on the safety bar, align the bar shaft into the seat on the safety device
control box spindle, fasten the nylon lock nut using the supplied spanner.
ASSEMBLY
11