Table of Contents
Advertisement
Anleitung_RT_SM_330_U_SPK7:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety information
Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout
2.1 Drag, crosscut and miter saw (Fig. 1-4)
1. Handle
2. ON/OFF switch
3. Release lever
4. Machine head
5. Saw shaft lock
6. Movable blade guard
7. Saw blade
8. Clamping device
9. Limit stop
10. Workpiece support
11. Stop rail
12. Scale
13. Fastening holes for table top installation
14. Locking grip
15. Pointer
16. Scale
17. Turntable
18. Fixed saw table
19. Scale
20. Pointer
21. Cable holder
22. Locking screw
23. Dust bag
24. Drag guide
25. Locking screw for drag guide
02.06.2008
14:22 Uhr
Seite 11
26. Tipping guard
27. Safety pin
28. Knurled screw for cutting depth limiter
29. Stop for cutting depth limiter
30. Locking screw for workpiece support
31. Extractor adapter
32. Extractor hose, short
33. Extractor hose, long
34. T-piece
35. Angle piece
36. Key for changing the saw blade
37. Reduction
38. Dust extraction nozzle
2.2 Base frame (Fig. 5)
A
Feet
B
Struts (long)
C Top angle brackets (long)
D
Struts (short)
E
Top angle brackets (short)
F
Screw connector (machine / base frame)
G Screw connector (base frame)
3. Items supplied (Fig. 1, 5)
Operating Instructions
Drag, crosscut and miter Saw
Base frame
4. Proper use
The drag, circular crosscut and miter saw is designed
to crosscut
wood and plastic suitable for the
machine's size.
firewood.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The machine is to be operated only with suitable saw
blades. It is prohibited to use any type of cutting-off
wheel.
To use the machine properly you must also observe
the safety regulations, the assembly instructions and
the operating instructions to be found in this manual.
GB
The saw is not designed for cutting
11
Advertisement
Table of Contents
