Table of Contents
Advertisement
PLUG IN POWER
Once all the needed cables are inserted, plug in the DC power
adapter into the P1 jack. This is a 2.5mm center contact and
requires a supply that comes with a 2.5mm jack or an adapter
to 2.5mm. See Table 1 for more info.
Figure 18 – DC IN JACK P1
POWER LEDS
Once the power plug is inserted in P1, the Power LED D41 will
light up.
D41 - 12V Present LED
D41
Figure 19 – DC 12V LED
TURN ON HD MONITOR
Once power is connected, turn on HDMI monitor. Change
input to the HDMI port the X15 is connected to.
Figure 20 – MONITOR POWER BUTTON
15
X15 QUICK START GUIDE
Advertisement
Table of Contents
