Table of Contents
Advertisement
KEYBOARD AND MOUSE
To avoid using up multiple USB ports a Wireless keyboard and
mouse combination is preferred. The transceiver can be
installed in either USB port including P6 eSATA connector.
Figure 12 – Keyboard Transmitter
AUDIO
To playback and record audio, insert speaker cable into Audio
OUT jack of the X15 and an audio source into the Audio IN
OUT
IN
jack.
Figure 13 – AUDIO JACKS
MICRO SD CARD
On the bottom edge of the X15 board, on the bottom side is
the micro SD card cage. I booting from SD card the micro SD
card is inserted as shown in Figure 12 with the top side facing
up. Change boot settings on J3-J4-J6 as shown in the next
section.
Figure 14 – micro SD CAGE
13
X15 QUICK START GUIDE
Advertisement
Table of Contents
