Towing The Mower - Jacobsen Standing Zero Turn Rotary Mower ZT90023 Safety, Operation & Maintenance Manual

7 OPERATION

7.10 TOWING THE MOWER _____________________________________________________

If the mower has a problem and the engine will not run, move the Neutral release knobs to the Neutral position and load
the mower on a trailer. If a trailer is not available, tow the mower at a slow speed for short distances.
Be careful when you load or unload the mower on the trailer. Fasten the mower to the trailer to prevent the mower to
move on the trailer. Engage the parking brake.
If the trailer is moved on the highway, inflate the tires to the maximum pressure recorded on the tire before you fasten
the mower to the trailer. Decrease the tire pressure after the mower is removed from the trailer.
Disengage the parking brake.
Before towing, disengage the parking brake and make sure the cutting unit is lifted.
When you tow the mower, do not drive more than 2 mph (3.2 km/hr). Jacobsen recommends that you do not tow the
mower for long distances.
When the mower gets to the service area, move the neutral release knobs to the normal operation position and engage
the parking brake.
en-33
NOTICE