Wiper Operation; Turning The System On Or Off; Front Wipers; Headlight Integration With Wipers - Honda Insight 2020 Owner's Manual

VEHICLE CONTROLS

Turning the System On or Off

n
Make sure the headlight lever is in the
low beam position with the switch
rotated to the AUTO position. The auto
high beam system indicator comes on.
To turn the system Pull and hold the headlight lever toward you for about
on: 30 seconds, until the indicator flashes once.
To turn the system Pull and hold the headlight lever toward you for about
off: 40 seconds, until the indicator flashes twice.

Wiper Operation

The windshield wipers and washers can be used when the vehicle is on.

Front Wipers

n
Move the wiper lever up or down to the desired position.
1. MIST
2. OFF
*6 *7
3. INT /AUTO
50 |
4. LO: Low speed wipe
5. HI: High speed wipe
*6 - Without automatic intermittent wipers
*7 - With automatic intermittent wipers

Headlight Integration with Wipers

n
When the headlights are in the AUTO position, they automatically turn on
when the front wipers operate several times within a certain interval. The
headlights turn off shortly after the wipers are turned off or if there is
enough ambient light.
*1
Intermittent (INT) Wipers
n
When you move the lever to the INT
position, the wipers operate based on
the delay adjustment.
Rotate the adjustment ring to adjust the
wiper delay.
*1
Automatic Intermittent Wipers
n
When you push the lever down to
AUTO, the windshield wipers sweep
once, and go into the automatic mode.
The wipers operate intermittently, at
low speed, or at high speed and stops
in accordance with the amount of
rainfall the rainfall sensor detects.
AUTO should always be turned OFF before the following situations in order
to prevent severe damage to the wiper system:
• Cleaning the windshield
• Driving through a car wash
• No rain present
VEHICLE CONTROLS
*1 - If equipped
| 51