Pairing A Phone; Talk Button Tips - Honda Insight 2020 Owner's Manual

® ®
BLUETOOTH HANDSFREELINK
(Pick-Up) button: Press to go directly to the phone menu on the driver
information interface, or to answer an incoming call.
(Hang-up) Press to end a call.
button:
(Back) button: Press to go back to the previous screen, or cancel a
command.
(Talk) button: Press to access Voice Portal.
Left Selector Press home button, then roll up or down to select Phone
Wheel: on the driver information interface, and then press the
left selector wheel.
Home button: Press to go back to the home screen of the driver
information interface.

Talk Button Tips

n
When using the Talk button, wait for the beep before saying a command.
The system recognizes commands listed in the Voice Command Index.
• When using the Talk button, wait until you hear a beep before speaking.
• To bypass the system prompts, simply press the Talk button again to say
your command.
• Speak in a clear, natural voice.
• Reduce all background noise.
• Adjust the dashboard vents away from the microphone on the ceiling.
• Close the windows and moonroof
84 |
*1
.
*1 - If equipped

Pairing a Phone

To use hands-free phone and streaming audio functions, you must first pair your
phone to the system. This can only be done when the vehicle is stopped. If there
is an active connection to Apple CarPlay
(see Android Auto), pairing of additional Bluetooth-compatible devices is
unavailable and Add Bluetooth Device is grayed out from the Bluetooth Device
List screen.
Pairing the First Phone
n
Models with Color Audio
Use the selector knob to make and enter selections.
1. Press the Phone button.
2. Select Yes.
3. Select Add New Device. Select Ok.
4. Make sure your phone is in search
or discovery mode.
HFL automatically searches for a
®
Bluetooth device.
5. When your phone appears on the list, select it. If your phone doesn't
appear, select Phone Not Found? and search for
using your phone. From your phone, select HandsFreeLink
6. The system gives you a pairing code on the audio/information screen.
Confirm if the pairing code on the screen and your phone match. This
may vary by phone.
7. A notification appears on the screen if pairing is successful.
Models with Display Audio
Use the touchscreen to make and enter selections.
1. Press the Home button.
2. Select Phone.
3. Select Connect Phone.
4. Make sure your phone is in search
or discoverable mode, then select
+Connect New Device.
HFL automatically searches for a
®
Bluetooth
device.
®
BLUETOOTH HANDSFREELINK
®
(see Apple CarPlay) or Android Auto
®
Bluetooth
devices
®
| 85
®
™