Operating The Freewheel Mode; Batteries And Charger - Relync R1 Owner's Manual

OPERATION

Operating the Freewheel Mode

If the batteries on the Relync R1
die or the scooter fails to operate
correctly, it can be moved manually
by switching the freewheel lever on
the front wheel.
Figure 20. Releasing the Freewheel
43
Ensure that the freewheel lever is
pushed back before operating the
scooter again.
Figure 21. Securing the Freewheel

Batteries and Charger

The charger supplied with the Relync R1 scooter is fully approved and small but powerful. It can be
connected to any electrical grid rating of 110VAc-240VA.
·To connect the charger correctly, connect the DC cable to the battery charger plug and then connect
the charger's AC cable to the electrical socket.
·To disconnect the charger correctly, apply the steps for connecting the charger in reverse.
Figure 22. Relync R1's Li-ion Battery
OPERATION
Figure 23. Relync R1's Charger
44