Getting On Relync R1; Getting Off Relync R1; Driving; Switching On Relync R1 - Relync R1 Owner's Manual

OPERATION

Getting on Relync R1

·Check that the scooter is switched off
·Check that the scooter is opened fully and securely (more information can be found in this User
Manual under the Unfolding section)
·Place one foot on the middle of the deck and sit on the seat making sure you are comfortable and
secure
WARNING! Avoid
WARNING!
leaning on the
not use the seat
handlebar tiller when getting
or backrest for support when
on or off the scooter. It may
getting on or off the scooter.
accidently move causing you
The seat may accidently fold
to lose balance and fall.
down causing you to lose
balance and fall.

Getting off Relync R1

·Check that the power is switched off
·Place one foot on the ground, move your weight onto that leg and slowly stand up, bringing your other
leg to the ground
·Move away from the scooter
39
Do WARNING!
Before getting
onto the scooter, ensure
that all parts are securely
locked in place.

Driving

Prior to using the mobility scooter:
1. Check that the batteries are securely locked in place within the housing.
2. Check that the batteries have been fully charged or that they will have enough capacity for your
journey.
3. Check that the freewheel lever is in the locked position.
4. Check that all locking parts are in the appropriate position, fully open and locked.

Switching on Relync R1

To switch the scooter on, press the Relync button and hold it down for 2 seconds.
The lights will come on for one second. The following information will then be displayed:
·Battery level
·Speed
·Direction arrow indicating forward mode
·Operating time
·Accumulated mileage

Forward Driving

·With your hands on the handgrips, move the tiller to the central position to drive forward
·Check which drive mode you are in by looking at the direction arrow on the dashboard. For forward
mode, the arrow should be pointing forwards away from your body. If it is facing backwards, depress
OPERATION
40