IOtech 640e Quick Start

IOtech 640e
Ethernet Dynamic Signal Analyzers for Vibration Analysis & Monitoring

Step 1 - Install Software

1. Close all running applications on the host PC.
2. Insert the Dynamic Signal Analysis CD into your CD-ROM drive and wait for the CD to auto-run. An Opening
Screen will appear. As an alternative, you can download software from:
3. Click the <ENTER SETUP> button.
Note: If you are downloading software from our website, follow instructions provided there.
4. From the hardware selection screen [which follows a licensing agreement], select the 640, 650 product-line
from the drop-down list and follow the on-screen instructions.

Step 2 - Connect the 640e or 650e to the Ethernet

In this scenario a 640e or 650e is connected directly to an Ethernet port on a host computer. Please consult your user's
manual (located in PDF format on the CD) should you need information regarding the other network types.
1. Connect the Ethernet cable to the Ethernet jack on the 640e [or 650e].
2. Connect the other end of the Ethernet cable to the Ethernet jack on the host computer or network hub.

Step 3 - Connect the 640e or 650e to Power

1. Connect the power supply cable from the TR-2U to the External Power connector of the 640e [or 650e].
2. Connect the TR-2U plug to a standard AC outlet. The 640e [or 650e] Power LED will light up.
650e
&
Before you get started verify that you have a 32-bit version
of Windows, the following items, and meet or exceed the
minimum requirements listed.
• 640e or 650e
• TR-2U Power Supply
• Ethernet Patch Cable
• Ethernet jack
[on PC or on a hub connected to the Ethernet]
• Dynamic Signal Analysis CD
• License Keys for purchased software;
e.g., eZ-Analyst, eZ-TOMAS, eZ-Balance, eZ-NDT
• Monitor: SVGA, 1024 x 768 screen resolution
• Windows 2000 SP4 and Windows XP users:
™
Intel Pentium 4 or equivalent
1 GB memory; 10 GB disk space
• Windows Vista (x86) users:
PC must be Windows Vista Premium Ready
www.iotech.com/ftp.html
Quick Start
324539C-01