Sony DSX-B700 Help Manual page 67

Item
Selects the input mode of the connected remote control. To prevent a malfunction, be sure to
match the input mode with the connected remote control before use.
[CUSTOM] (custom)
STR CONTROL
Input mode for the steering wheel remote control.
(steering control)
[PRESET] (preset)
Input mode for the wired remote control excluding the steering wheel remote control.
(Automatically selected when [RESETCUSTOM] is performed.)
Registers the functions (SOURCE, ATT (attenuate), VOL (volume) +/–, SEEK +/–, VOICE, ON
HOOK, OFF HOOK) to the steering wheel remote control:
EDIT CUSTOM
control, then press it.
(edit custom)
you want to assign the function to. When registration is complete, [REGISTERED] is displayed.
(Available only when [STR CONTROL] is set to [CUSTOM].)
RESETCUSTOM Resets the registered functions of the steering wheel remote control: [YES], [NO].
(reset custom) (Available only when [STR CONTROL] is set to [CUSTOM].)
Note
While making settings, only button operation on the unit is available. For safety, park your car before making this setting.
If an error occurs while registering, all the previously-registered information remains. Restart registration from the function where
the error occurred.
This function may not be available on some vehicles. For details on the compatibility of your vehicle, visit the support site.
USB AUTOPLY (USB auto play)
Activates the USB auto play: [ON], [OFF].
USB MODE (USB mode)
Changes the USB mode: [ANDROID], [MSC/MTP].
(Available only when the USB source is selected.)
AF/TA (alternative frequencies/traffic announcement) (DSX-B700(EUR)/DSX-B710D)
Selects the alternative frequencies (AF) and traffic announcement (TA) setting: [AF-ON], [TA-ON], [AF/TA-ON], [AF/TA-
OFF].
REGIONAL (regional) (DSX-B700(EUR)/DSX-B710D)
Restricts reception to a specific region: [ON], [OFF].
(Available only when FM is received.)
BTM (best tuning memory)
Presets stations automatically.
(Available only when the radio is selected.)
Rotate the control dial to select the function you want to assign to the steering wheel remote
While [REGISTER] is blinking, press and hold the button on the steering wheel remote control
To register other functions, repeat steps
Detail
and .
67