Listening To The Radio; To Preset Stations Automatically (Btm); To Tune To A Station; To Preset A Station - Sony DSX-B700 Help Manual

Help Guide
In-Car Receiver
DSX-B700/DSX-B700W/DSX-B710D

Listening to the Radio

Make sure that the tuning step is properly set according to your area/region (DSX-B700(E)/DSX-B700(IN)).
Press SRC (source) to select [RADIO].

To preset stations automatically (BTM)

1.
Press MODE to change the band*.
2.
Press MENU, rotate the control dial to select [GENERAL], then press it.
3.
Rotate the control dial to select [BTM], then press it.
The unit presets stations in order of frequency on the number buttons.
*
The following bands can be selected:
DSX-B700(UC)/DSX-B700(E)/DSX-B700(IN)/DSX-B700W: FM1, FM2, FM3, AM1, AM2.
DSX-B700(EUR)/DSX-B710D: FM1, FM2, FM3, AM/LW.

To tune to a station

1.
Press MODE to change the band*.
2.
Perform tuning.
To tune manually
Press and hold
repeatedly to finely adjust to the desired frequency.
To tune automatically
Press / (SEEK –/+).
Scanning stops when the unit receives a station.
*
The following bands can be selected:
DSX-B700(UC)/DSX-B700(E)/DSX-B700(IN)/DSX-B700W: FM1, FM2, FM3, AM1, AM2.
DSX-B700(EUR)/DSX-B710D: FM1, FM2, FM3, AM/LW.

To preset a station

While receiving the station that you want to preset, press and hold a number button (1 to 6) until [MEMORY] appears.
To receive preset stations
Select the band, then press a number button (1 to 6).
Related Topic
Switching the FM/AM Tuning Step (DSX-B700(E)/DSX-B700(IN))
General Setup (GENERAL)
/ (SEEK –/+) to locate the approximate frequency, then press
5-004-923-11(3) Copyright 2019 Sony Corporation
24
/ (SEEK –/+)