Table of Contents
Advertisement
This drive is designed to release heat through its case. The surface of the case may become quite hot in normal use.
Even when the drive is off, the case may still be warm from standby current.
If the power/access LED does not turn off when you turn off your computer, unplug the USB cable from the
drive.
Some computers do not support power saving mode.
Before using this drive with a Mac, reformat it with Mac OS Extended using the disk utility in Mac OS.
Dismounting the Drive
If your computer is turned on, please follow the procedure below to unplug the drive. If your computer is turned off,
then it is always safe to unplug the drive. Unplugging the drive incorrectly can corrupt data. Please be careful.
For Windows
1
Click the icon
2
When the menu opens, click the device name.
3
A message that indicates you can safely remove the drive will appear.
For Mac
1
Drag this drive's icon to the trash to dismount the drive. Or, click the dismount icon
Finder to dismount the drive.
2
It's now safe to unplug the drive from your Mac.
Troubleshooting
I can see the MiniStation in Computer (This PC) but I cannot access it
The drive may require formatting. Try using DiskFormatter2. Please refer to the "About Formatting" section below.
I cannot see the MiniStation
Verify that the power/access LED is on. If it is not, check the cable. The MiniStation should be connected to your
computer by a USB cable. Check that both ends are correctly plugged in.
,
or
in the system tray.
5
from the sidebar of the
Advertisement
Table of Contents
