Sepura TETRA STP8000 Series Product Care Manual
Hide thumbs
Also See for TETRA STP8000 Series:
- Product manual (45 pages) ,
- Quick reference manual (5 pages) ,
- Installation & user manual (4 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sepura TETRA STP8000 Series
Summary of Contents for Sepura TETRA STP8000 Series
-
Page 1: Tetra Terminal Product Care Guide
TETRA Terminal Product Care Guide STP9000, STP8000 & STP8X Series PD-T201405/1... - Page 2 © Sepura plc. 2014 All rights reserved. This document is intended for the use of Sepura plc’s customers and/or other parties only for the purposes of the agreement or arrangement under which this document is submitted, and no part of it may be reproduced or transmitted in any form or means without the prior written permission of Sepura plc.
-
Page 3: Table Of Contents
Storage Storing batteries Smartcards and MircoSD cards Sepura terminals are manufactured to meet strict international design standards and guidelines for environmental and operational compliance. The terminal does not require regular servicing, however, it is recommended that the terminal is routinely cleaned and inspected to ensure that the product continues to operate correctly and reliably. -
Page 4: Cleaning
Cleaning To maintain the product in good working condition, it is recommended that the terminal is cleaned regularly. Warning! Always obey your local health and safety procedures when using potentially harmful cleaning solutions. Warning! Appropriate Personal Protective Equipment (PPE) should be worn when cleaning the product. -
Page 5: Antenna
Warning! STP8X Series terminals must not be used without the covers fitted. Using the STP8X terminal without covers fitted may invalidate the compliance rating of the product. Antenna You can clean the antenna connector on the terminal and the connector on the antenna using a soft brush. -
Page 6: Specialist Cleaning
Specialist cleaning Sometimes the terminal may be subjected to conditions that require additional cleaning such as salt water, mud, body fluid and foul substances such as sewage. If the product has been subjected to contamination, seek advice from your local Health and Safety authority. -
Page 7: Care During Operation
However, it is important that you take precautions to prevent damage to the terminal whist in use. Sepura has a range of accessories designed to protect the terminal during operation. -
Page 8: Routine Maintenance
Routine Maintenance To ensure that your product is kept in good working condition, it is recommended that regular inspections are performed to check for damage or worn parts. Any part of the product that is damaged must be replaced to ensure that the product remains within its safety compliance ratings. -
Page 9: Storage
Storage Terminals and batteries can be stored for periods of time under certain conditions. The maximum length of storage time and the conditions of storage vary between the terminal models and battery types. Storing batteries Batteries should not be stored attached to the terminal. Always remove the battery before placing into storage. - Page 10 Sepura plc. Radio House, St Andrew’s Road, Cambridge CB4 1GR United Kingdom Tel: +44 (0)1223 876000 Fax: +44 (0)1223 879000 www.sepura.com...
Need help?
Do you have a question about the TETRA STP8000 Series and is the answer not in the manual?
Questions and answers