DeWalt DCR027 Original Instructions Manual page 5

HEAVY-DUTY BLUETOOTH® WORK SITE CHARGER/RADIO
DCR027
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Power source
Type
Mains voltage
Battery type
Battery voltage
Charge Current
Weight (without battery pack)
EC-Declaration of Conformity
Radio Equipment Directive
Heavy-Duty Bluetooth® Work Site
Charger/Radio
DCR027
D WALT hereby declares that the D
e
DCR027 is in compliance with the Directive 2014/53/EU and to
all applicable EU directive requirements.
The full text of the EU declaration of conformity can be
requested at D WALT, Richard- Klinger-Straße 11, D-65510,
e
Idstein, Germany or is available at the following internet address:
www.2helpU.com
Search by the Product and Type Number indicated on the
nameplate.
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
WALT one of the
e
DCR027
AC/DC
1
V 230
AC
Li-Ion
V 14.4/18
DC
A 3
kg 7.4
WALT radio equipment
e
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
Safety Instructions for Charger/Radios
• Do not abuse cord. Never carry the radio by its cord. Never
pull the cord to disconnect from the socket. Keep the cord
away from heat, oil and sharp edges.
• Remove the battery pack. Switch off before leaving it
unattended. Remove the battery pack when not in use, before
changing accessories or attachments and before servicing.
• This appliance is intended to be used in moderate climates.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Connect the radio charger to a mains supply that is
properly connected to earth. Socket and extension cord
must have an operative protective conductor.
• When operating the radio charger in damp
environments is unavoidable, use a residual current
device (RCD). The use of a residual current device (RCD)
reduces the risk of electric shock.
• Children should be supervised to ensure that they do not play
with the appliance.
• Radio shall not be exposed to dripping or splashing; no objects
filled with liquids, such as vases, shall be placed on it.
• No exposed flame sources, such as lighted candles, should be
placed on the radio.
• Mains plug is used as the disconnect device; the disconnect
device (plug) shall remain readily operable.
Electrical Safety
The charger/radio has been designed for one voltage only.
Always check that the battery pack voltage corresponds to the
voltage on the rating plate. Also make sure that the voltage of
your charger corresponds to that of your mains.

WARNING: Risk of electric shock. Use in dry locations only.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the D
service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
English
WALT
e
3